Filtration and Backwashing Performance of Biologically-Active Filters
Before widespread use can be made of biological filters, it is crucial to develop an understanding of the filtration and backwashing performance of these filters. Experimental results...

In Situ Treatment of VOCs by Recirculation Technologies
Confronted with contaminated land from the world wars and the postwar industrialization period, German researchers and practicing professionals have worked to develop processes for effective...

Hydraulic Model Studies of Recessed Curb Inlets and Bridge Drains
A large hydraulic model (64 ft long by 10.5 ft wide) was used to test several geometries of recessed curb inlets and three types of bridge drains. Testing was at 3/4 scale for the recessed...

Velocity Control Rings for RC Pipe on Steep Slopes
This paper discusses the use of internal concrete rings to reduce velocity and concrete erosion for reinforced concrete pipes on steep slopes in the Southern California area....

Laplace Valve Stroking for Complex Piping Systems
LaPlace valve stroking to control water hammer is applied in complex piping systems with friction and without friction. Two types of system are analyzed. The law of operation of the valves...

Standard Practice for Direct Design of Buried Precast Concrete Pipe Using Standard Installations (SIDD)
This publication, Standard Practice for Direct Design of Buried Precast Concrete Pipe Using Standard Installations (SIDD), (ASCE 15-93), is applicable to buried concrete precast pipe intended...

Upgrading Dubai's Sewers
The sewerage system serving the city of Dubai in the United Arab Emirates, is plagued with odor and corrosion problems. System elements were deteriorating and failure rates were increasing....

America's Pavements: World's Longest Bathtubs
Pavements are the most unusual structures designed by civil engineers. Water flows through their tops, bottoms and sides but because pavements are relatively flat, flows out again very...

Offshore Rescue
Restoration of wastewater ocean outfalls can be difficult, dangerous and environmentally challenging. Two recent projects, however, serve as examples of innovative outfall rehab. The first...

Existing Sewer Evaluation and Rehabilitation
This manual, Existing Sewer Evaluation and Rehabilitation, Second Edition, provides general guidance and serves as a source of information...

Sludge Under Pressure
Few wastewater engineers ever have to deal with high-pressure pumping. In San Diego, however, city engineers will soon oversee a 100,000 ft long psi main that will transport sewage sludge...

Fast Foundation for Soft Clay
This article describes the detailed foundation work and high-capacity piling design for a flue gas desulfurization (FGD) retrofit system for the Lambton Generation Station in Ontario,...

Ductility Analysis of Overload and Settlement
The concept of sufficient ductility to avoid premature or brittle failures is gaining wide acceptance in structural engineering and is an important aspect in mitigating the consequences...

Prediction of Embankment Dam Breaching for Hazard Assessment
Downstream hazard assessments for dams require prediction of 1) whether a breach could form, and 2) the hydraulic characteristics of the breach for use in calculations of discharge and...

Rehabilitation of a Toe Drain
Old or improperly designed toe drains can cause trouble for embankment dams. Toe drains installed without proper filtering can provide an easy course for internal erosion and piping of...

Experimental Evaluation of Reservoir Bottom Remediation Material
Open trenches developed through a compacted clay liner on the bottom of a reservoir. An experimental investigation has been conducted to evaluate the feasibility of using silt-sized, nonplastic...

Geotechnical Modifications at Meeks Cabin Dam
This paper presents a summary of the geologic and geotechnical evaluation of a potential piping deficiency identified at Meeks Cabin Dam as well as description of remedial measures and/or...

Installation and Routing of Critical Embedments at the Hanford Waste Vitrification Plant
During the preliminary design phase of the project, a study was conducted to develop concepts for routing embedded piping and conduit between the remote cells and the service corridors...

Global Approaches for the Nonconvex Optimization of Pipe Networks
Because the pipe network problem is nonconvex, two global search schemes, MULTISTART and ANNEALING, are employed to permit a local optimum seeking method to migrate among various local...

Pipe Network Optimisation Using Genetic Algorithms
A new optimization technique of generic algorithms has recently been successfully applied to pipe network optimization. In this paper a parametric analysis is carried out of the genetic...

 

 

 

 

Return to search